Adds a check to find if the renderer is Intel DG (i.e. DG2).
gl_device: Detect Mesa to disable their ASTC
In our testing, our own ASTC decoder has shown itself to perform faster
than the included one from the driver. Disable theirs when Mesa is
detected.
Mesa detection depends on the vendor string. Some drivers never appear
outside of *nix contexts, so only check those in the *nix context.
gl_device: Internalize Intel DG detection
ReadSetting with the default is a convenience function reading
settings, not for use in an internal environment. It tries to manage
the default value of a setting.
The new enum macros don't support setting values directly.
For LastAA and LastFilter, this means we need a simpler approach to loop
around the toggle in the frontend...
The shorter constructor enables us to specify some options without needing to
specify the default values of multiplier which wasn't always appropriate and
could be confusing.
This particular setVisible function is unnecessary.
It also has horrible runtime performance, so much that it consumed maybe
80% of the time used to create a widget.
Groups graphics audio and system settings together in a way that
reflects the frontend. This also just conceptually groups them more
nicely than they were.
Needs a considerable amount of management specific to some of
the comoboboxes due to the audio engine configuration.
general: Partial audio config implmentation
configure_audio: Implement ui generation
Needs a considerable amount of management specific to some of
the comoboboxes due to the audio engine configuration.
general: Partial audio config implmentation
settings: Make audio settings as enums
We can iterate through the AdvancedGraphics settings and generate the UI
during runtime. This doesn't help runtime efficiency, but it helps a ton
in reducing the amount of work a developer needs in order to add a new
setting.
LoadString: Sanitize input
settings: Handle empty string, remove redundant category
settings: Rename Input to Controls, FS to DataStorage
settings: Fix Controls groups information
settings: Move use_docked_mode to System (again)
settings: Document
settings: Add type identification function
settings: Move registry into values
settings: Move global_reset_registry into values
settings: Separate AdvGraphics from Renderer
settings: More document
squash
settings: Use linkage object
uisettings: Move registry into settings
Probably wont build without
uisettings: Use settings linkage object
config: Load settings with a map
Uses the new all_settings vector to load settings.
qt-config: Rename settings category
qt config: Rename to read category
config: Read/write contols category with for_each
This is extremely limited due to the complexity of the Controls group,
but this handles the the settings that use the interface.
qt-config: Use new settings registry
qt-config: Read/write advgrphics
qt-config: Use settings linkage object
yuzu_cmd: Load setting off of vector
cmd-config: Finish settings rename
config: Read controls settings group with for_each
cmd/config: Move registry into values
cmd: Read adv graphics
cmd-config: Use settings linkage object
There are still some other issues not addressed here, but it's a start.
Workarounds for false-positive reports:
- `RasterizerAccelerated`: Put a gigantic array behind a `unique_ptr`,
because UBSan has a [hardcoded limit](https://stackoverflow.com/questions/64531383/c-runtime-error-using-fsanitize-undefined-object-has-a-possibly-invalid-vp)
of how big it thinks objects can be, specifically when dealing with
offset-to-top values used with multiple inheritance. Hopefully this
doesn't have a performance impact.
- `QueryCacheBase::QueryCacheBase`: Avoid an operation that UBSan thinks
is UB even though it at least arguably isn't. See the link in the
comment for more information.
Fixes for correct reports:
- `PageTable`, `Memory`: Use `uintptr_t` values instead of pointers to
avoid UB from pointer overflow (when pointer arithmetic wraps around
the address space).
- `KScheduler::Reload`: `thread->GetOwnerProcess()` can be `nullptr`;
avoid calling methods on it in this case. (The existing code returns
a garbage reference to a field, which is then passed into
`LoadWatchpointArray`, and apparently it's never used, so it's
harmless in practice but still triggers UBSan.)
- `KAutoObject::Close`: This function calls `this->Destroy()`, which
overwrites the beginning of the object with junk (specifically a free
list pointer). Then it calls `this->UnregisterWithKernel()`. UBSan
complains about a type mismatch because the vtable has been
overwritten, and I believe this is indeed UB. `UnregisterWithKernel`
also loads `m_kernel` from the 'freed' object, which seems to be
technically safe (the overwriting doesn't extend as far as that
field), but seems dubious. Switch to a `static` method and load
`m_kernel` in advance.
Allow for displaying options in the home options that are disabled with messages that explain why they are disabled.
This includes reasoning for the GPU driver installation button.
MinGW's strftime implementation does not work and cannot be used to
determine the time zone. Besides that, the string operations are
actually unnecessary since we can get the offset from
std::localtime.
Compare localtime to gmtime to find the zone offset on all platforms.
While this can be convenient in some scenarios, this will be a big problem for users trying to sideload different APK versions. If they forget the last one they had installed, they could have problems installing a new copy.
This allows to share the mappings between Nintendo and non-Nintendo controllers.
Breaks the controller configuration for existing users who are using a Nintendo controller.
(Documentation of the hint 92b3c53c92/include/SDL_hints.h (L512-L532))
Even though it compiles and runs fine on the latest Windows versions,
older LTSC builds will crash due to lacking support somewhere in the OS.
For now just disable it for MSVC until either Microsoft fixes this or we
no longer support 1809 LTSC.
Now within the Input Overlay file, there is a version that will determine when the overlay will be reset. This is intended for breaking changes like the ones we had with the additions of percentage based layouts or the addition of foldable/portrait layouts. This also includes versions for each individual layout so we don't have to reset every layout if only one is broken.
Additionally, this includes new L3/R3 buttons.
* Many times the format itself wouldn't have been added to the list causing device losses for nvidia GPUs
* Also account for ASTC acceleration storage views
Android Gradle plugin 8.0.2 is designed for API 33, but a newer plugin hasn't been released yet. The warning message is rather extravagant, but also suggests adding this property if you are aware of the risks.
Adds <version> since we are looking at C++ implementation version
details. Also moves exception header includes into the if preprocessor
command since we only use it there.
Windows will let you select time zones that will fail in their
own C++ implementation library. Evidently from the stack trace, we get a
runtime error to work with, so catch it and use the fallback.
- Add missing virtual destructor on `SSLBackend`.
- On Windows, filter out `POLLWRBAND` (one of the new flags added) when
calling `WSAPoll`, because despite the constant being defined on
Windows, passing it calls `WSAPoll` to yield `EINVAL`.
- Reduce OpenSSL version requirement to satisfy CI; I haven't tested
whether it actually builds (or runs) against 1.1.1, but if not, I'll
figure it out.
- Change an instance of memcpy to memmove, even though the arguments
cannot overlap, to avoid a [strange GCC
error](https://github.com/yuzu-emu/yuzu/pull/10912#issuecomment-1606283351).
The original name `larg` was copied from the OpenSSL documentation and
is not a typo of 'large' but rather an abbreviation of '`long`
argument'. But whatever, no harm in adding an underscore.
This implements some missing network APIs including a large chunk of the SSL
service, enough for Mario Maker (with an appropriate mod applied) to connect to
the fan server [Open Course World](https://opencourse.world/).
Connecting to first-party servers is out of scope of this PR and is a
minefield I'd rather not step into.
## TLS
TLS is implemented with multiple backends depending on the system's 'native'
TLS library. Currently there are two backends: Schannel for Windows, and
OpenSSL for Linux. (In reality Linux is a bit of a free-for-all where there's
no one 'native' library, but OpenSSL is the closest it gets.) On macOS the
'native' library is SecureTransport but that isn't implemented in this PR.
(Instead, all non-Windows OSes will use OpenSSL unless disabled with
`-DENABLE_OPENSSL=OFF`.)
Why have multiple backends instead of just using a single library, especially
given that Yuzu already embeds mbedtls for cryptographic algorithms? Well, I
tried implementing this on mbedtls first, but the problem is TLS policies -
mainly trusted certificate policies, and to a lesser extent trusted algorithms,
SSL versions, etc.
...In practice, the chance that someone is going to conduct a man-in-the-middle
attack on a third-party game server is pretty low, but I'm a security nerd so I
like to do the right security things.
My base assumption is that we want to use the host system's TLS policies. An
alternative would be to more closely emulate the Switch's TLS implementation
(which is based on NSS). But for one thing, I don't feel like reverse
engineering it. And I'd argue that for third-party servers such as Open Course
World, it's theoretically preferable to use the system's policies rather than
the Switch's, for two reasons
1. Someday the Switch will stop being updated, and the trusted cert list,
algorithms, etc. will start to go stale, but users will still want to
connect to third-party servers, and there's no reason they shouldn't have
up-to-date security when doing so. At that point, homebrew users on actual
hardware may patch the TLS implementation, but for emulators it's simpler to
just use the host's stack.
2. Also, it's good to respect any custom certificate policies the user may have
added systemwide. For example, they may have added custom trusted CAs in
order to use TLS debugging tools or pass through corporate MitM middleboxes.
Or they may have removed some CAs that are normally trusted out of paranoia.
Note that this policy wouldn't work as-is for connecting to first-party
servers, because some of them serve certificates based on Nintendo's own CA
rather than a publicly trusted one. However, this could probably be solved
easily by using appropriate APIs to adding Nintendo's CA as an alternate
trusted cert for Yuzu's connections. That is not implemented in this PR
because, again, first-party servers are out of scope.
(If anything I'd rather have an option to _block_ connections to Nintendo
servers, but that's not implemented here.)
To use the host's TLS policies, there are three theoretical options:
a) Import the host's trusted certificate list into a cross-platform TLS
library (presumably mbedtls).
b) Use the native TLS library to verify certificates but use a cross-platform
TLS library for everything else.
c) Use the native TLS library for everything.
Two problems with option a). First, importing the trusted certificate list at
minimum requires a bunch of platform-specific code, which mbedtls does not have
built in. Interestingly, OpenSSL recently gained the ability to import the
Windows certificate trust store... but that leads to the second problem, which
is that a list of trusted certificates is [not expressive
enough](https://bugs.archlinux.org/task/41909) to express a modern certificate
trust policy. For example, Windows has the concept of [explicitly distrusted
certificates](https://learn.microsoft.com/en-us/previous-versions/windows/it-pro/windows-server-2012-r2-and-2012/dn265983(v=ws.11)),
and macOS requires Certificate Transparency validation for some certificates
with complex rules for when it's required.
Option b) (using native library just to verify certs) is probably feasible, but
it would miss aspects of TLS policy other than trusted certs (like allowed
algorithms), and in any case it might well require writing more code, not less,
compared to using the native library for everything.
So I ended up at option c), using the native library for everything.
What I'd *really* prefer would be to use a third-party library that does option
c) for me. Rust has a good library for this,
[native-tls](https://docs.rs/native-tls/latest/native_tls/). I did search, but
I couldn't find a good option in the C or C++ ecosystem, at least not any that
wasn't part of some much larger framework. I was surprised - isn't this a
pretty common use case? Well, many applications only need TLS for HTTPS, and they can
use libcurl, which has a TLS abstraction layer internally but doesn't expose
it. Other applications only support a single TLS library, or use one of the
aforementioned larger frameworks, or are platform-specific to begin with, or of
course are written in a non-C/C++ language, most of which have some canonical
choice for TLS. But there are also many applications that have a set of TLS
backends just like this; it's just that nobody has gone ahead and abstracted
the pattern into a library, at least not a widespread one.
Amusingly, there is one TLS abstraction layer that Yuzu already bundles: the
one in ffmpeg. But it is missing some features that would be needed to use it
here (like reusing an existing socket rather than managing the socket itself).
Though, that does mean that the wiki's build instructions for Linux (and macOS
for some reason?) already recommend installing OpenSSL, so no need to update
those.
## Other APIs implemented
- Sockets:
- GetSockOpt(`SO_ERROR`)
- SetSockOpt(`SO_NOSIGPIPE`) (stub, I have no idea what this does on Switch)
- `DuplicateSocket` (because the SSL sysmodule calls it internally)
- More `PollEvents` values
- NSD:
- `Resolve` and `ResolveEx` (stub, good enough for Open Course World and
probably most third-party servers, but not first-party)
- SFDNSRES:
- `GetHostByNameRequest` and `GetHostByNameRequestWithOptions`
- `ResolverSetOptionRequest` (stub)
## Fixes
- Parts of the socket code were previously allocating a `sockaddr` object on
the stack when calling functions that take a `sockaddr*` (e.g. `accept`).
This might seem like the right thing to do to avoid illegal aliasing, but in
fact `sockaddr` is not guaranteed to be large enough to hold any particular
type of address, only the header. This worked in practice because in
practice `sockaddr` is the same size as `sockaddr_in`, but it's not how the
API is meant to be used. I changed this to allocate an `sockaddr_in` on the
stack and `reinterpret_cast` it. I could try to do something cleverer with
`aligned_storage`, but casting is the idiomatic way to use these particular
APIs, so it's really the system's responsibility to avoid any aliasing
issues.
- I rewrote most of the `GetAddrInfoRequest[WithOptions]` implementation. The
old implementation invoked the host's getaddrinfo directly from sfdnsres.cpp,
and directly passed through the host's socket type, protocol, etc. values
rather than looking up the corresponding constants on the Switch. To be
fair, these constants don't tend to actually vary across systems, but
still... I added a wrapper for `getaddrinfo` in
`internal_network/network.cpp` similar to the ones for other socket APIs, and
changed the `GetAddrInfoRequest` implementation to use it. While I was at
it, I rewrote the serialization to use the same approach I used to implement
`GetHostByNameRequest`, because it reduces the number of size calculations.
While doing so I removed `AF_INET6` support because the Switch doesn't
support IPv6; it might be nice to support IPv6 anyway, but that would have to
apply to all of the socket APIs.
I also corrected the IPC wrappers for `GetAddrInfoRequest` and
`GetAddrInfoRequestWithOptions` based on reverse engineering and hardware
testing. Every call to `GetAddrInfoRequestWithOptions` returns *four*
different error codes (IPC status, getaddrinfo error code, netdb error code,
and errno), and `GetAddrInfoRequest` returns three of those but in a
different order, and it doesn't really matter but the existing implementation
was a bit off, as I discovered while testing `GetHostByNameRequest`.
- The new serialization code is based on two simple helper functions:
```cpp
template <typename T> static void Append(std::vector<u8>& vec, T t);
void AppendNulTerminated(std::vector<u8>& vec, std::string_view str);
```
I was thinking there must be existing functions somewhere that assist with
serialization/deserialization of binary data, but all I could find was the
helper methods in `IOFile` and `HLERequestContext`, not anything that could
be used with a generic byte buffer. If I'm not missing something, then
maybe I should move the above functions to a new header in `common`...
right now they're just sitting in `sfdnsres.cpp` where they're used.
- Not a fix, but `SocketBase::Recv`/`Send` is changed to use `std::span<u8>`
rather than `std::vector<u8>&` to avoid needing to copy the data to/from a
vector when those methods are called from the TLS implementation.
SDL has internally fixed shenanigans related to wakelocking through DBus
from inside sandboxes from around August 2022, so we can now remove the
workaround we used since 2021.
This is a deviation from the reference time zone implementation. The
actual code will set a pointer to the time zone name here, but for us we
have a limited number of characters to work with, and the name of the
time zone here could be larger than 8 characters.
We can make the assumption that time zone names greater than five
characters in length include a comma that denotes more data. Nintendo
just truncates that data for the name, so we can do the same.
time_zone_manager: Check for length of array
Just to be double sure that we never break past the array length,
directly compare against it.
Also limits it to only affected Intel proprietrary driver versions.
vulkan_device: Move broken compute determination
vk_device: Remove errant back quote
Ameer J
german77
lat9nq
liamwhite
Kelebek1
Liam
Alexandre Bouvier
Morph
Moonlacer
Moonlacer
GPUCode
Abandoned Cart
bunnei
Valeri Ochinski
comex
Tobias
Charles Lombardo
Martino Fontana
gidoly
zeltermann
Steveice10
Fernando S
Matías Locatti
Merry
Kirill Ignatev