To keep the TAS inputs synced to the game speed even through lag spikes and loading zones, deeper access is required.
First, the `TAS::UpdateThread` has to be executed exactly once per frame. This is done by connecting it to the service method the game calls to pass parameters to the GPU: `Service::VI::QueueBuffer`.
Second, the loading time of new subareas and/or kingdoms (SMO) can vary. To counteract that, the `CPU_BOOST_MODE` can be detected: In the `APM`-interface, the call to enabling/disabling the boost mode can be caught and forwarded to the TASing system, which can pause the script execution if neccessary and enabled in the settings.
First of all, TASing requires a script to play back. The user can select the parent directory at `System -> Filesystem`, next to an option to pause TAS during loads: This requires a "hacky" setup deeper in the code and will be added in the last commit.
Also, Hotkeys are being introduced: CTRL+F5 for playback start/stop, CTRL+F6 for re-reading the script and CTRL+F7 for recording a new script.
The base playback system supports up to 8 controllers (specified by `PLAYER_NUMBER` in `tas_input.h`), which all change their inputs simulataneously when `TAS::UpdateThread` is called.
The recording system uses the controller debugger to read the state of the first controller and forwards that data to the TASing system for recording. Currently, this process sadly is not frame-perfect and pixel-accurate.
Co-authored-by: Naii-the-Baf <sfabian200@gmail.com>
Co-authored-by: Narr-the-Reg <juangerman-13@hotmail.com>
The log filter was being ignored on initialization due to the logging instance being initialized before the config instance, so the log filter was set to its default value.
This fixes that oversight, along with using descriptive exceptions instead of abort() calls.
Some system configurations may see visual regressions or lower performance using GPU decoding compared to CPU decoding. This setting provides the option for users to specify their decoding preference.
Co-Authored-By: yzct12345 <87620833+yzct12345@users.noreply.github.com>
This fixes a lost wakeup in SPSCQueue. If the reader is in just the right position, the writer's notification will be lost and this will be a problem if the writer then does something to wait on the reader.
This was discovered to affect my upcoming stacktrace PR. I don't think any performance decrease will be noticeable because an uncontended mutex is smart enough to skip the syscall. This PR might also resolve some rare deadlocks but I don't know of any examples.
This implements backtraces so we don't have to tell users how to use gdb anymore.
This prints a backtrace after abort or segfault is detected. It also fixes the log getting cut off with the last line containing only a bracket. This change lets us know what caused a crash not just what happened the few seconds before it.
I only know how to add support for Linux with GCC. Also this doesn't work outside of C/C++ such as in dynarmic or certain parts of graphics drivers. The good thing is that it'll try and just crash again but the stack frames are still there so the core dump will work just like before.
This simplifies the logging system.
This also fixes some lost messages on startup.
The simplification is simple. I removed unused functions and moved most things in the .h to the .cpp. I replaced the unnecessary linked list with its contents laid out as three member variables. Anything that went through the linked list now directly accesses the backends. Generic functions are replaced with those for each specific use case and there aren't many. This change increases coupling but we gain back more KISS and encapsulation.
With those changes it was easy to make it thread-safe. I just removed the mutex and turned a boolean atomic. I was planning to use this thread-safety in my next PR about stacktraces. It was actually async-signal-safety at first but I ended up using a different approach. Anyway getting rid of the linked list is important for that because have the list of backends constantly changing complicates things.
This commit renames the "Services" tab to "Network" and adds a combobox that allows the user to select the network interface that yuzu should use. This new setting is now used to get the local IP address in Network::GetHostIPv4Address. This prevents yuzu from selecting the wrong network interface and thus using the wrong IP address. The return type of Network::GetHostIPv4Adress has also been changed.
According to https://stackoverflow.com/questions/469508, we run into a
MSVC bug (since VS 2005) when using diamond inheritance for
RangedSetting.
This explicitly implements those functions in RangedSetting. GetValue is
implemented as just calling the inherited version. The explicit
converson operator is reimplemented. I opted for this over ignoring the
warning with a pragma since this specifies the inherited behavior, and I
have now less faith in MSVC to pick the right one.
In addition, we mark destructors as virtual to silence what I believe is
a fair MSVC compilation error.
Fixes a theoretical scenario where a Setting is using the BasicSetting's
GetValue function. In practice this probably only happens on yuzu-cmd,
where there is no need for a Setting's additional features. Need to fix
regardless.
Use VK_KHR_pipeline_executable_properties when enabled and available to
log statistics about the pipeline cache in a game.
For example, this is on Turing GPUs when generating a pipeline cache
from Super Smash Bros. Ultimate:
Average pipeline statistics
==========================================
Code size: 6433.167
Register count: 32.939
More advanced results could be presented, at the moment it's just an
average of all 3D and compute pipelines.
This setting is best referred to as a speed limit, as it involves the limits of all timing based aspects of the emulator, not only framerate.
This allows us to differentiate it from the fps unlocker setting.
GLASM is getting good enough that we can move it out of advanced
graphics settings. This removes the setting `use_assembly_shaders`,
opting for a enum class `shader_backend`. This comes with the benefits
that it is extensible for additional shader backends besides GLSL and
GLASM, and this will work better with a QComboBox.
Qt removes the related assembly shader setting from the Advanced
Graphics section and places it as a new QComboBox in the API Settings
group. This will replace the Vulkan device selector when OpenGL is
selected.
Additionally, mark all of the custom anisotropic filtering settings as
"WILL BREAK THINGS", as that is the case with a select few games.
Mostly fixing unused *, implicit conversion, braced scalar init,
fpermissive, and some others.
Some Clang errors likely remain in video_core, and std::ranges is still
a pertinent issue in shader_recompiler
shader_recompiler: cmake: Force bracket depth to 1024 on Clang
Increases the maximum fold expression depth
thread_worker: Include condition_variable
Don't use list initializers in control flow
Co-authored-by: ReinUsesLisp <reinuseslisp@airmail.cc>
Some titles crash if the FPS limit is disabled when launching. This change ensures that titles launch with the limit in-place to avoid issues.
In order to simplify the change, the UI toggle was removed as it will always be overridden at launch to be disabled.
The setting can still be toggled during gameplay with the hotkey, and indicated by the fps label in the status bar.
Decouples the CPU debugging mode from the enumeration to its own
boolean. After this, it moves the CPU Debugging tab over to a sub tab
underneath the Debug tab in the configuration UI.
Old CPU Accuracy setting won't translate well into since we're adding
one at the beginning of the list. On first boot with the new setting,
just use the default setting.
The current CPU accuracy settings in yuzu are fairly polarized and
require more than common knowledge to know what the optimal settings for
yuzu would be. This adds a curated option called 'Auto' that applies a
few at the moment known-good unsafe optimizations to Dynarmic.
Slight improvements to readability.
Dropped suggestions for string_view (settings.h:101), pass by value
(settings.h:82), reverting double to a float (config.cpp:316), and other
smaller ones, some out of scope.
Addresses review feedback.
Co-authored-by: Ameer J <52414509+ameerj@users.noreply.github.com>
There's no point in keeping the file open after the write limit is exceeded. This allows the file to be committed to the disk shortly after it is closed and avoids redundantly checking whether or not the write limit is exceeded.
It became apparent that logging can continuously spam errors that trigger file flushing.
Since committing the files to disk is an expensive operation, this causes unnecessarily high disk usage.
As such, we will revert Flush() to the previous behavior and add a Commit() member function in the event that this behavior is needed.
Creates a new BasicSettings class in common/settings, and forces setting
a default and label for each setting that uses it in common/settings.
Moves defaults and labels from both frontends into common settings.
Creates a helper function in each frontend to facillitate reading the
settings now with the new default and label properties.
Settings::Setting is also now a subclass of Settings::BasicSetting. Also
adds documentation for both Setting and BasicSetting.
